CO2 Cylinder 9kg Capacity Compleate with All Necessary CO2 Gas Fittings Support and Accessories Connected with Valve

CO2 Cylinder 4.5kg Capacity Compleate with All Necessary CO2 Gas Fittings Support and Accessories Connected with Valve

Single loop with capacity of 235 devices. Flush-mount new structure. 30 Zones, Integrated Wide range PSU (100240V) with Battery Charger, Excluding Batteries (Certified by LPCB)

-Three layered synthetic jacketed, with elastomeric outer covering highly resistant to liquids, oils, chemicals, acid, alkalies, solvent, abrasion & heat,

275 LPM

-AAAG” make SS 304 63mm Single Headed Hydrant Valve as per IS: 5290 Type - “A”, ISI marked With 75mm NB flanged Inlet with PVC Blank cap & Chain

Without Bucket

Copper Alloy 63mm Hydrant Female Adaptor as per IS 5290

- Design Reference Standard IS 14846
- Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge
- Rigid and Sturdy design.
- Hand Wheel Operated.
- Flanged ends to IS 1538.
- Provision of Re-Packing under pressure.
- Maximum Working Temperature : 45 C
- Suitable for - Water

- Design Standard IS 14846 PN 1.6.
- Bolted Bonnet, Inside Screw, Non - Rising Stem.
- Rigid and Sturdy design.
- Handwheel Operated.
- Flanged Ends as per IS 1538.
- Maximum Working Temperature : 45 C
Suitable for - Water

Gunmetal 125mm Suction Strainer as per IS 907

Strainer available in : Copper, Brass, Stainless Steel,

CONNECTOR ADAPTER,5IN STORZ X 6IN FLANGE
F/ PUMPER CONNECTION CL150, GUNMETAL 125MM 5IN STORZ (KA 148) GUNMETAL COMPLETE W/ GUNMETAL CAP AND
BRASS CHAIN. RED 6IN CL150 ANSI RAISED FACE CARBON STEEL FUSION BONDED EPOXY COATED W/ RED POLYURETHANE FINISH.