CO2 Cylinder 4.5kg Capacity Compleate with All Necessary CO2 Gas Fittings Support and Accessories Connected with Valve

Single loop with capacity of 235 devices. Flush-mount new structure. 30 Zones, Integrated Wide range PSU (100240V) with Battery Charger, Excluding Batteries (Certified by LPCB)

-AAAG” make SS 304 63mm Single Headed Hydrant Valve as per IS: 5290 Type - “A”, ISI marked With 75mm NB flanged Inlet with PVC Blank cap & Chain

Without Bucket

- Design Reference Standard IS 14846
- Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge
- Rigid and Sturdy design.
- Hand Wheel Operated.
- Flanged ends to IS 1538.
- Provision of Re-Packing under pressure.
- Maximum Working Temperature : 45 C
- Suitable for - Water

- Design Standard IS 14846 PN 1.6.
- Bolted Bonnet, Inside Screw, Non - Rising Stem.
- Rigid and Sturdy design.
- Handwheel Operated.
- Flanged Ends as per IS 1538.
- Maximum Working Temperature : 45 C
Suitable for - Water

Gunmetal 137mm Suction Strainer as per IS 907

Strainer available in : Copper, Brass, Stainless Steel,

CONNECTOR ADAPTER,5IN STORZ X 6IN FLANGE
F/ PUMPER CONNECTION CL150, GUNMETAL 125MM 5IN STORZ (KA 148) GUNMETAL COMPLETE W/ GUNMETAL CAP AND
BRASS CHAIN. RED 6IN CL150 ANSI RAISED FACE CARBON STEEL FUSION BONDED EPOXY COATED W/ RED POLYURETHANE FINISH.

- Design Reference Standard IS 14846
- Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge
- Rigid and Sturdy design.
- Hand Wheel Operated.
- Flanged ends to IS 1538.
- Provision of Re-Packing under pressure.
- Maximum Working Temperature : 45 C
Suitable for - Water

- Strong, Integrally moulded rubber liner makes L&T Butterfly Valve a fit & Forget
Valve.
- Bubble-tight sealing is obtained by the tight interference between liner and disc.
- Hydro dynamically designed disc for minimum resistance to flow.
The in-situ moulded seat does not deform with age, and hence the operating
torque stays low & consistent.
- The integral liner of the valve acts as a gasket between the valve and
companion flange.
- Xylan coated shaft for low torque and smooth operation.
- ISO 5211 compliant mounting pad suitable for direct actuator mounting.