Isolation Valves

Brands Available



Sant Valves Pvt. Ltd. - Home | Facebook
Kartar


Missing the Brand you are looking for?  Contact us

How isolation valve works?

A diaphragm isolation valve—also known as a "membrane valve"—is a solenoid-operated device that uses a diaphragm that extends and retracts to seal the valve seat and isolate the flow path. This type of isolation valve can be constructed from inert materials, including an entirely inert fluid path.

BR Ball Valve PN 16 -Zoloto
- Screwed Female Ends to IS 554 / BS 21/ ISO 7.
- Full Bore, Two Piece Design.
- Quarter Turn, Level Operated.
- Provided with Forged Brass Hard Chrome Plated Ball.
- Premium Quality PTFE Gland Packing and Seating.
- Chrome Finish.

- Test Pressure (Hydrostatic)
Shell : 25 kg/cm2g (350psig)
Seat : 16 kg/cm2g (225 psig)
- Maximum Working Temperature : 220 C

Suitable For - Water, Oil
4.11 4.11 USD
CI 80mm Butterfly valve PN-16 - HONEYWELL
Honeywell Manual Butterfly Valve, Handlever Operated, CI Body, DI Disc, PN16,
DN80
Wide Size range (DN50…DN900)
• Operated by Lever or Gear Box.
• 90 deg opening/closing operation.
• Cast iron Body with powder coating.
• Epoxy Coated Ductile Iron disc.
• Wafer type Connection
32.91 32.910000000000004 USD
47.91 47.910000000000004 USD
CI Sluice Valve Non Rising Spindle PN-10 Zoloto
- Design Reference Standard IS 14846 PN 1.0.
- Bolted Bonnet, Inside Screw, Non - Rising Stem.
- Rigid and Sturdy design.
- Hand Wheel Operated.
- Flanged Ends as per IS 1538.
- Maximum Working Temperature : 45 C
Suitable for - Water
69.94 69.94 USD
CI Sluice Valve PN-10 LEADER Make
LEADER SLUICE VALVE,IS:14846,PN-1.0,C.I.(IS: 210
GR FG-200)Bolted Bonnet,
Inside Screw,Non- Rising Stem,Renewable Seat, Solid
Wedge,Cu - alloy ,
Stem SS IS 6603 (12 Cr. 13), Lubricated Hemp and
Jute, Carbon Steel
(IS : 1367) ,Rubber (IS 638 Type B),Flanges as per
IS:1538,PN 1.0 FF (Drilled)
As Per IS 14846B.T.P. -1.5 MPa Hyd.,: S.T.P. - 1.0 MPa
Hyd.
100.32 100.32000000000001 USD
CI 40mm NRV Flanged-Leader Make
LEADER MAKE CI HORIZONTAL LIFT CHECK VALVE,
DIN EN 12334,PN-16,RENEWABLE SEAT & DISC,SS(
ASTM A276 TYPE 410)CS (BS916),FLANGE END AS PER
DIN 2533 PN-16 DRILLED. BTP-24BAR,STP-16 BAR HYD
40mm
196.53 196.53 USD
Price against Inquiry 0.0 USD
Price against Inquiry 0.0 USD
Price against Inquiry 0.0 USD
CI Sluice Valve PN-16 - Rising - Zoloto Make
- Design Reference Standard IS 14846
- Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge
- Rigid and Sturdy design.
- Hand Wheel Operated.
- Flanged ends to IS 1538.
- Provision of Re-Packing under pressure.
- Maximum Working Temperature : 45 C
- Suitable for - Water
90.50 90.5 USD