CI Butterfly Valve PN 10 L&T
- Strong, Integrally moulded rubber liner makes L&T Butterfly Valve a fit & Forget
Valve.
- Bubble-tight sealing is obtained by the tight interference between liner and disc.
- Hydro dynamically designed disc for minimum resistance to flow.
The in-situ moulded seat does not deform with age, and hence the operating
torque stays low & consistent.
- The integral liner of the valve acts as a gasket between the valve and
companion flange.
- Xylan coated shaft for low torque and smooth operation.
- ISO 5211 compliant mounting pad suitable for direct actuator mounting.
Specifications
| Design Parameters | |
|---|---|
| Isolation Valves Size | 50mm or 100mm or 150mm or 200mm |
| Flange Dimensions | ASME B16.5 CLASS 150 |
| Pressure Rating | PN 10 |
| Operating Temperature | Maximum 70 deg C |
| Valve Design | EN593 |
| MoC (Material of Construction) | |
|---|---|
| MOC - Body/All Parts | Body - Cast Iron |
| MoC - Disc | Nylon-Encapsulated Disc |
| Face Shield | EN 558 - SERIES 20 |
| Flow Control Level | IS:2062 Gr.A |
| Name Pate | Aluminium |
| Bearing | Acetal COPOLYMER |
| Line | Nitrile Rubber |
| Shaft Top & Bottom | Xylan-Coated |
| Wheather Seal | Nitrile Rubber |
| Functional Parameters | |
|---|---|
| Operation | Lever |
| Inspection Parameters | |
|---|---|
| Seat Pressure | 11 kg/cm2 |
| Test Pressure | 15 Kg/Cm2 |
| General | |
|---|---|
| Brand | L&T |
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.