Fire Protection System

Gunmetal 3” N.B. Orifice Plate of 3mm thickness

Accessories
1.φ65×φ19 nozzle 1pc
2.φ65×20m hose with coupling 1pc
3. Tool kit 1kit
4. Usual manual 1pc

Accessories
1.φ65×φ19 nozzle 1pc
2.φ65×20m hose with coupling 1pc
3. Tool kit 1kit
4. Usual manual 1pc

GM Orfice Plate having 100mm x 6mm

Devraj Make Gunmetal 63mm Hydrant Valve Bib Nose Type

- Design Reference Standard IS 14846
- Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge
- Rigid and Sturdy design.
- Hand Wheel Operated.
- Flanged ends to IS 1538.
- Provision of Re-Packing under pressure.
- Maximum Working Temperature : 45 C
- Suitable for - Water

Marine Nickel Aluminium Bronze Fire Hydrant valves, Globe SD- Angle with suction side flanged end and discharge male threaded end fitted with Double pull Morris female coupling with NAB cap & 3mm SS Chain as per DIN std, PN16. Working Pressure: 09 bar.
Material: Body: Nickel Al-Bronze (NES 747 part-2), Internals (Disc, seat, spindle: Nickel Al-Bronze (NES 747 part-2), Internal fasteners: NAB.

LEADER MAKE CI HORIZONTAL LIFT CHECK VALVE,
DIN EN 12334,PN-16,RENEWABLE SEAT & DISC,SS(
ASTM A276 TYPE 410)CS (BS916),FLANGE END AS PER
DIN 2533 PN-16 DRILLED. BTP-24BAR,STP-16 BAR HYD
40mm

CO2 Cylinder 4.5kg Capacity Compleate with All Necessary CO2 Gas Fittings Support and Accessories Connected with Valve

CO2 Cylinder 9kg Capacity Compleate with All Necessary CO2 Gas Fittings Support and Accessories Connected with Valve

SS Sprinkler Guard

Honeywell Manual Butterfly Valve, Handlever Operated, CI Body, DI Disc, PN16,
DN80
Wide Size range (DN50…DN900)
• Operated by Lever or Gear Box.
• 90 deg opening/closing operation.
• Cast iron Body with powder coating.
• Epoxy Coated Ductile Iron disc.
• Wafer type Connection

New generation valve with unique and non-conventional design.
This valve is offered in one side threaded and other side strainer design.
Suitable for a very wide range of applications like slurry, sewage, paper,
chemical, water supply, agriculture, muddy water, slurry, paper stock,
viscous liquid and clear water. Robust and very simple mechanism.
A floating reinforced rubber coated ball is used instead of hinge-pin-disc.
Highly sensible to arrest flow with perfect sealing. Very low head loss .
Non clogging and self cleaning mechanism .
Installation can be vertically or horizontally. Operates silently upto 80 oC

- Screwed Female Ends to IS 554 / BS 21/ ISO 7.
- Full Bore, Two Piece Design.
- Quarter Turn, Level Operated.
- Provided with Forged Brass Hard Chrome Plated Ball.
- Premium Quality PTFE Gland Packing and Seating.
- Chrome Finish.

- Test Pressure (Hydrostatic)
Shell : 25 kg/cm2g (350psig)
Seat : 16 kg/cm2g (225 psig)
- Maximum Working Temperature : 220 C

Suitable For - Water, Oil