Model : DSZVCF3.2
Temperature 1260 c & TC 1100 C

GM 200mm 4-Way Breeching Inlet

“PYROPROTECT” BRAND FLEXIBLE FIRE FIGHTING DELIVERY HOSE

-Three layered synthetic jacketed, with elastomeric outer covering highly resistant to liquids, oils, chemicals, acid, alkalies, solvent, abrasion & heat,

-Dia. 63mm X 15mtr. length,

-Working Pressure 18kg/cm2, Proof Pressure 25kg/cm2, Mini. Burst Pressure 38kg/cm2,

-BEARING IS: 636-2018 TYPE-3, ISI MARK, CE MARKED,

-Without Couplings

Inherent flame resistance blend 93% Meta Aramid, 5% Para Aramid & 2% Antistatic.
Colour: Navy, Royal, Khaki, Orange, Red
Design : Coverall

• Single layer coverall made of Inherent flame resistance blend 93% Meta
Aramid ,5% Para Aramid & 2% Antistatic.
• GSM of the fabric 150.
• Two -way metal zipper with full sleeves cuff & metal snap closure.
• Two chest pockets with flap & one pen pocket on sleeves.
• Right leg a tool pocket.
• Two side pockets concealed access from the outside to the inside.
• Two back pockets with flap & Velcro.
• For high visibility, one-inch EN 471 certified FR silver reflective tape is
applied across the shoulder, sleeves, and bottom.
• Elasticized waistband.
• Throughout the garment's manufacturing, FR thread is employed.
• All the accessories and thread used flame resistance.
Test Certificate: -
Certified in accordance to-
ISO11612 – A1, B1, C1, C4, F1, F3
EN1149
NFPA 2112

Application: Refineries, Oil gas industries.

With 4mm thick float glass with gasket.

Supply of AAAG” make
“SELECT-O-FLOW Nozzle”
constructed with combined Aluminium
Alloy Extruded, Hard Anodised, Pistol
Grip Hand, Rubber Bumper Fixed,
Spinning teeth, flow pattern (Straight
Stream to wide fog) approx.
180-270-430-560LPM@7Kgf/cm2

Supply of “AAAG” make CONSTANT
FLOW nozzle having 63mm male
inst. inlet and light weight (made of Al.
alloy hard anodized) with Pistol Grip
handle, Rubber Bumper, with a
capacity flow adjustable from 500LPM
LPM@7kg/cm2 made of AL. ALLOY
CASTINGS

With inside cartridge type

Pistol grip handle type nozzle, made out of light
weight Al. Alloy extrusion, hard anodize, selectable jet &
spray flow pattern from 360-475-600-750 and 900 LPM
and 45 Mtr maximum throw at 7 kg/cm2 pressure,
shut-off valve with flow control valve, Spinning teeth ring
generate < 120 deg Spray pattern, provision for flush
without shutting down, twist operation for jet-spray,
63mm male Inst. inlet as per IS:903, Confirming NFPA
1964.

Made of extruded all. Alloy hard anodized for
resistance to corrosion and wear. Select "O" metic mode
provides variable flow rates 115-225-360 and 475 lpm at 7
kg/cm2, and flush without shutting down. Spinning teeth
ring form water curtain for cooling and operators
protection from heat. Ball valve operated flow control
lever for shutting off. Inlet with 63mm male inlet
conforming to IS:903, Piston grip for greater contro

Made out of light weight Al. Alloy extrusions, hard
anodize, jet-spray pattern, shut-off valve with flow control
handle, flush with out shut-off, capable to discharge 600
LPM jet & spray, 35 Mtr Jet throw at 7 kg/cm2, twist
operation for Jet & Spray, 63mm male inst. inlet, As per
NFPA 1964.

- Long Tail
Minimum Order Quantity : 50

(AR ) Alcohol Resistant type (AFFF) Aqueous Film Forming Foam Foam Liquid in ISI Mark

Copper Alloy 63mm DOUBLE MALE ADAPTOR COMMERCIAL